Confirm Strip Test
SKU# CST060
Autoclave Spore Test to insure the safty of your sterilizing procedures and to make sure your autoclave is sterilizing properly.
Instructions for Use:Remove the test strips from the pocket marked "test strip" (DO NOT remove test strips from blue glassine envelope, as this will invalidate the test.Label strips - #1 and # 2Place 1 test strip in the center of the packs to be sterilized and the other in the most difficult to sterilize location. Run a normal sterilization cycle.Upon completion of the sterilization cycle (Let strips dry completely before returning to envelope), remove the test strips and return to the pocket marked "test strip". Seal the flap closed. Complete all information requested on the addressed pre-paid envelope and mail.Test failures wil be reported immediately by phone, fax or e-mail. Test results are mailed to you quarterly.Should be done once a month.
Contains 6 Test Packets
Each Packet Contains 2 Test Strips and 1 Control Strip.
|